This time we have updated a new audio output method, Bluetooth audio output. This method keeps the machine sound coming out of the car stereo steadily. For this, we corrected the mode of operation of the sound output. Please follow the steps below. You also can download the file to check it. (https://drive.google.com/file/d/1Dh7zBUQL3XAHjHPLN_iM6vZZ0QILWz4e/view?usp=share_link)
1. Firmware Update Process
. Prepare TF card (32G) and computer (windows or mac)
. Download the new firmware.
https://drive.google.com/file/d/1ehcgOonIturRP5XE4dvJBRrq1T-RVeIV/view?usp=share_link
. Download the burning program “PhoenixCard”, and unzip the file. https://orient.taipei/user_common_file/phoenixcard_en.zip
. Insert the TF card into PC/Mac, run the “PhoenixCard” software.
You can find the portable memory card is ready and shown on the list. Select the TF card you prepared.
. Click “Image” , select the new firmware (img file)
. Click “Burn”.
It will make the img disk. It will shows green bar on status and “Burn End” once the process is done.
. Take the TF card out of the computer and insert it into RX10. Plug in the power cord, and the machine will start updating automatically. Please do not take out the TF card or cut the power during updating. When the Light bar fills the red frame, the update is complete, take out the TF card. Now you can start using the machine after power cycle
. Note: After updating, the memory card is under the image format and cannot be used as a storage card. Please use “PhoenixCard” to restore it. Insert the TF card into computer and run the “PhoenixDisk”, click the “restore”.
2. Operation changes





Select the band you want to (e.g. 106.0 MHZ), and tune the FM frequency to the same band on your radio in the vehicle.
: Tap the icon and tap “Confirm”. The audio is output by the AUX in mode of the car stereo. The volume adjustment is controlled by car stereo.